Posts Tagged ‘water bath’

Sourdough work in progress (part I)

Thursday, May 21st, 2009

apricot-starter
Attempt to make a sourdough starter using dried apricots, using my immersion circulator for temperature control. I got some bubbling yeast activity, but the final bread dough never rose properly.

Inspired by the Swedish bread blog Pain de Martin which I recently discovered I decided it was time to have a go at sourdough breads! Although one of my favorite types of bread it’s a long time since I gave it a try and even longer since I actually succeeded. Leaving apple peel covered with water for two weeks in a cool place (15 °C) I got a light apple cider which I used to make a starter some years ago. I followed a recipe from the Norwegian artisan bakery Ã…pent bakeri and it gave a marvelous bread. But since then I’ve tried to repeat this twice without success. No wonder that even Rose Levy Beranbaum in her book “The Bread Bible” writes that she didn’t intend to include a chapter on sourdough at all. There’s no doubt that sourdoughs are tricky, but I was a litte surprised and disappointed that someone who sets of to write a 600+ page book on bread even considered to skip sourdough… Luckily she changed her mind and the introduction has a fascinating nice-to-know fact: 1 g flour contains about 320 lactic acid bacteria and 13000 yeast cells!

I believe one the reasons why sourdoughs seem to live their own lifes sometimes is that they need to be kept in a warm place. My kitchen isn’t that warm so I figured it was time to use my immersion circulator and give sourdough another chance (who says you can only use immersion circulators for sous vide anyway? – I think my next project will be to make yoghurt!). With a thermostated water bath keeping a sourdough starter at constant temperature is as easy as 1-2-3. But surprisingly I haven’t seen any blogposts yet from people using their sous vide water baths for sourdough starters (although some have built their own water baths for this purpose using aquarium equipment).
(more…)

A mathematician cooks sous vide

Sunday, January 18th, 2009

douglasbaldwin
Douglas Baldwin with two immersion circulators and a vacuum chamber sealer.

Since I got my immersion circulator in December I’ve discovered that there are two critical questions that always come up as I hold a piece of meat in my hands, ready to cook it sous vide: At what temperature should I cook this? And for how long? Despite the fact that two books were published on sous vide last fall it is the short yet comprehensive guide “A Practical Guide to Sous Vide Cooking” by Douglas Baldwin that I’ve found most useful to answer these questions. Those who have followed the eGullet thread on sous vide cooking will probably recognize Douglas Baldwin as one of the major contributors alongside Nathan Myhrvold. Out of curiosity and eager to learn more I therefore emailed Douglas and asked if he would be interested in doing an email interview.

ML: From your homepage I see that you are a PhD student in applied mathematics, how did you become interested in sous vide?

DB: I have always loved to cook. Before last January, though, I mainly cooked slow food. That is when I saw sous vide mentioned in one of Harold McGee’s NY Times articles. Wow. Cooking meat at its desired final core temperature is so obvious! As a mathematician, I kicked myself for never asking “if overcooked meat is bad, what temperature should the meat be cooked at?” A question which many mathematician would instantly answer, “just above the temperature you want it to end up at.”
(more…)

Upcoming books on sous vide

Wednesday, June 25th, 2008

A number of books related to molecular gastronomy and food science will appear this fall – I’ve previously mentioned the Fat Duck and Alinea cookbooks. But there is more, much more! This time I would like to draw the attention to two books on sous vide which are due to appear in October. And notice how nice the titles compliment each other – one is under pressure, the other one under vacuum!

Thomas Keller, known from the French Laundry, Bouchon and per se, has written the book “Under Pressure – Cooking Sous Vide” (the Under Pressure title was also used by NY Times in a 2005 feature article on sous vide). According to the publisher, Keller and his chefs de cuisine have blazed the trail to perfection through years of trial and error and they show the way in this collection of never-before-published recipes from his landmark restaurants.

The book “Sous-Vide Garen im Vakuum” (Sous vide cooking under vacuum) by Viktor Stampfer (known from the Ritz-Carlton in Dubai) has received much less attention, but certainly deserves to mentioned. The title is in German, but do not despair – it seems to be a bilingual edition with German and English text (can anyone confirm this?), but so far it’s only available for preorder from the German Amazon. According to the publisher the book gives an introduction to the equipment used including sealing devices and recommended temperatures for cooking together with numerous recipes.

These are not the first books to appear on sous vide – enthusiasts have probably obtained one or more of the books by Roca, Farber, Ghazala, Leadbetter, Choain/Noël and Calmejane/Barrier – but I’m quite sure that the new books will complement these very nicely, and they will certainly be more available as several of the others have unavailable for some time.

Perfect steak with DIY “sous vide” cooking

Sunday, January 21st, 2007

One important aspect of molecular gastronomy is the application of scientific principles to food preparation in a normal kitchen. This can very well be illustrated by discussing the preparation of a steak. The surface of the meat needs to be heated to > 120 °C (250 F) for the Maillard reaction to take place at a reasonable rate. This gives meat much of it’s characteristic aroma. The interior of the meat however should not be heated to more than 50-65 °C (120-150 F) for a rare or a medium rare appearance. If the heat is provided by a frying pan with a temperature typically in the range 120-160 °C (250-320 F), the different temperature required for the interior and the surface of the meat can actually be quite difficult to achieve. Bringing the meat to room temperature before cooking by taking it out of the fridge 1-2 hours in advance helps. Also, half way through the cooking it’s advisable to let the meat rest on a plate to allow the heat to diffuse into the interior and to let the surface cool down a little.

There is however an easier way to make a perfect steak! In restaurants the method has been around since the 70’s and is known under the name sous vide (fr. under vacuum, more info on history of sous vide in this NY Times article). The meat is packed in plastic bags, vacuumed and put into thermostated water baths. This equipment is not (yet?) found in the average kitchen. So here is a simple DIY procedure. You just use a normal plastic bag, leave the meat in the water bath for 30 min (or longer) and then quickly fry both sides to generate the products of the Maillard reaction. You do need a thermometer though to control the temperature of the water bath, preferably one with a dip in probe.

1. Put the meat (I used a rib eye steak for this experiment) in a thick plastic bag. Only put one or two pieces of meat in each plastic bag – this ensures a greater contact surface with the water.

meat in plastic bag

2. Add any spices you like (salt and pepper always works well – for the experiment shown I used curry paste, soy sauce and chili sauce in stead), press (or suck) out the air and close the plastic bag tightly by tying a knot (or use a zip-lock bag). You don’t want any water to enter the bag!

meat in plastic bag

3. Heat a pot of water to the desired temperature (or use hot tap water) and place the plastic bag with meat in the water. Cover with a lid (not shown in the picture) to reduce heat loss. If you use a large pot of water it’s easier to keep the temperature constant. Also, it’s easier to control the temperature with an induction or gas stove top than with an electric plate since there is no additional heating once you turn them off. Regarding the temperature, start with 60 °C (140 F) and experiment from there (or check this table at Wikipedia for doneness temperatures of meat). You should leave the meat in the water for at least 30 minutes – more for a thicker cut. But the good thing is you can leave it for much longer (several hours) provided the temperature does not come above 60 °C (or whatever temperature you decided on). A convenient way to keep the temperature constant for a long time is to put the pan with water into the oven and use the thermostat of the oven.

meat in plasticbag, water at 59 C

4. Heat a frying pan, add a fat of you choice, remove meat from plastic bag and brown both sides of the meat. Since you take the meat directly from the water bath it’s already at about 60 °C. Therefore the browning is very fast.

meat-in-frying-pan

5. A temperature of 60 °C (140 F) gives the meat a pink interior. It’s succulent and juicy. The short frying gives it a nice browned crust and the chewing resistance is perfect. All in all a wonderful combination of taste, aroma, texture and mouth feel!

meat-interior

Note added January 2009:
Since I published this procedure the first time I’ve learnt a lot more about sous vide. The procedure above is a rather crude procedure, but it works. If the meat turns out grey you’ll need to turn the temperature somewhat down. If you’re interested in reading more about sous vide, the best discussion I know of which also includes important safety aspects is Douglas Baldwin’s “A Practical Guide to Sous Vide Cooking”.

Related posts:
A mathematician cooks sous vide
Sous vide cooking joy
Santa came early this year
Upcoming books on sous vide